LJ9200C-MIB :: default_copy_duplex_mode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsLJ9200C-MIBdefault_copy_duplex_mode

default_copy_duplex_mode

Module: LJ9200C-MIB

OID (symbolic): LJ9200C-MIB::default_copy_duplex_mode

OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.28

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Returns or sets the duplex copying mode. Duplex printing is when printing occurs on both sides of a sheet of media. Long edge binding is also called vertical binding or book binding. Short edge binding is also called horizontal binding or calendar binding. eSimplexToSimplex: takes image data from only one side of the original document, and print only on one side of each copy. eSimplexToDuplexLongEdgeBinding: takes image data from only one side of the original document, and print to both sides of each copy. The images are rotated so that if the media is rotated along the axis of the long edge of the media, both images would appear as in the original. eSimplexToDuplexShortEdgeBinding: takes image data from only one side of the original document, and print to both sides of each copy. The images are rotated so that if the media is rotated along the axis of the short edge of the media, both images would appear as in the original. eDuplexToDuplex: takes image data from both sides of the original document, and print on both sides of each copy. eDuplexToSimplexLongEdgeBinding: takes image data from both sides of the original document, and prints to only one side of each copy. The images are rotated so that if the media is rotated along the axis of the long edge of the media, both images would appear as in the original. eDuplexToSimplexShortEdgeBinding: takes image data from both sides of the original document, and prints to only one side of each copy. The images are rotated so that if the media is rotated along the axis of the short edge of the media, both images would appear as in the original.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.28
snmpwalk -v2c -c public <target> LJ9200C-MIB::default_copy_duplex_mode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.28.1
snmpget -v2c -c public <target> LJ9200C-MIB::default_copy_duplex_mode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.28.1 i <value>

Start monitoring HP Digital Sender 9200C document scanning/distribution appliance with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ9200C-MIB::default_copy_duplex_mode OID value, configure state conditions and alerts, and monitor any HP Digital Sender 9200C document scanning/distribution appliance from a single console.

OID Breakdown

Upper-level ancestors (15 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9net_peripheralCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4netdmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2dmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1deviceCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1.5copierLJ1220-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1.5.1settings_copierLJ1220-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.9.4.2.1.5.1.28default_copy_duplex_modeLJ9200C-MIB