All MIBs › LJ4730-MIB › supplies_replace_action_at_setting
supplies_replace_action_at_setting
Module: LJ4730-MIB
OID (symbolic): LJ4730-MIB::supplies_replace_action_at_setting
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object can be used to change the setting of menu item REPLACE SUPPLIES. The behavior of the printer when a supply reaches low changes in accordance with the setting of this PML Object. If the option eStopAtLow is selected printer will stop when a supply reaches LOW. If the option eStopAtOut is selected then printer will stop when a supply reaches OUT. If the options eStopAtMaxLife (supported only on Mono products) is selected, the printer will continue past supply OUT. If the option eOverrideAtOut or eOverrideAtOut2 (supported only on Color products) is selected then printer will continue past OUT in override mode. This option is not writeable. That is using this PML object the setting could be changed to any option other than eOverrideAtOut and eOverrideAtOut2. Additional information: This PML object can be used to change the setting of the menu item REPLACE SUPPLIES. The behavior of the printer when a supply hits low changes in accordance with the setting of this PML Object. 1. eStopAtLow - Printer will stop when a supply reaches low. 2. eStopAtOut - Printer will stop when a supply reaches out. 3. eOverrideAtOut[Read-only, Color Products] - Printer will continue print past out in override mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.25 snmpwalk -v2c -c public <target> LJ4730-MIB::supplies_replace_action_at_setting
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.25.1 snmpget -v2c -c public <target> LJ4730-MIB::supplies_replace_action_at_setting.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.25.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> supplies_replace_action_at_setting.1
Start monitoring HP LaserJet 4730 multifunction printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ4730-MIB::supplies_replace_action_at_setting OID value, configure state conditions and alerts, and monitor any HP LaserJet 4730 multifunction printer from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | destination_subsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | print_engine | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1 | settings_prt_eng | IJ8060-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.25 | supplies_replace_action_at_setting | LJ4730-MIB |