All MIBs › LJ2200-MIB › tray2_fuser_temperature
tray2_fuser_temperature
Module: LJ2200-MIB
OID (symbolic): LJ2200-MIB::tray2_fuser_temperature
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The fuser temperature to be used when printing media from Tray 2. The value zero is the default temperature. Values less than zero are progressively lower and values greater than zero are progressively higher. The range of values supported is device specific. Additional information: See TRAY1-FUSER-TEMPERATURE.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.13 snmpwalk -v2c -c public <target> LJ2200-MIB::tray2_fuser_temperature
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.13.1 snmpget -v2c -c public <target> LJ2200-MIB::tray2_fuser_temperature.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.13.1 i <value>
Start monitoring Legacy printer/embedded-controller hardware (HOST-RESOURCES-based storage model) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ2200-MIB::tray2_fuser_temperature OID value, configure state conditions and alerts, and monitor any Legacy printer/embedded-controller hardware (HOST-RESOURCES-based storage model) from a single console.
OID Breakdown
Upper-level ancestors (18 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | destination_subsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | print_engine | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | intray | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | intrays | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2 | intray2 | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.13 | tray2_fuser_temperature | LJ2200-MIB |