L2TP-MIB :: l2tpTunnelStatsRemoteFirmwareRev

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › L2TP-MIB › l2tpTunnelStatsRemoteFirmwareRev

l2tpTunnelStatsRemoteFirmwareRev

Module: L2TP-MIB

OID (symbolic): L2TP-MIB::l2tpTunnelStatsRemoteFirmwareRev

OID (numeric): 1.3.6.1.2.1.10.95.1.5.1.7

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This object contains the tunnel peer's firmware revision number. If the tunnel is idle this object should maintain its value from the last time it was connected.

What is l2tpTunnelStatsRemoteFirmwareRev?

The tunnel peer's firmware revision number, retained from the last connection if the tunnel is idle.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.95.1.5.1.7
snmpwalk -v2c -c public <target> L2TP-MIB::l2tpTunnelStatsRemoteFirmwareRev

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.95.1.5.1.7.1
snmpget -v2c -c public <target> L2TP-MIB::l2tpTunnelStatsRemoteFirmwareRev.1

Start monitoring Vendor-neutral IETF standard, RFC 3371 (L2TP access concentrators/network servers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the L2TP-MIB::l2tpTunnelStatsRemoteFirmwareRev OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard, RFC 3371 (L2TP access concentrators/network servers) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.95l2tpL2TP-MIB
1.3.6.1.2.1.10.95.1l2tpObjectsL2TP-MIB
1.3.6.1.2.1.10.95.1.5l2tpTunnelStatsTableL2TP-MIB
1.3.6.1.2.1.10.95.1.5.1l2tpTunnelStatsEntryL2TP-MIB
1.3.6.1.2.1.10.95.1.5.1.7l2tpTunnelStatsRemoteFirmwareRevL2TP-MIB