L2TP-MIB :: l2tpTunnelConfigReassemblyTO

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › L2TP-MIB › l2tpTunnelConfigReassemblyTO

l2tpTunnelConfigReassemblyTO

Module: L2TP-MIB

OID (symbolic): L2TP-MIB::l2tpTunnelConfigReassemblyTO

OID (numeric): 1.3.6.1.2.1.10.95.1.4.1.12

Node type: OBJECT-TYPE

Type: L2tpMilliSeconds

Access: read-write

Description: This object defines the number of milliseconds that this tunnel will wait before processing payload packets that were received out of sequence (which are waiting for the packet(s) to put them in sequence). A low value increases the chance of delayed packets to be discarded (which MAY cause the PPP decompression engine to reset) while a high value may cause more queuing and possibly degrade throughput if packets are truly lost. The default value for this object is zero which will result in all delayed packets being lost. Modifications to this object have immediate effect.

What is l2tpTunnelConfigReassemblyTO?

How long this tunnel waits, in milliseconds, for out-of-order payload packets before giving up on reassembly; defaults to 0 (drop immediately) and changes apply right away.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.95.1.4.1.12
snmpwalk -v2c -c public <target> L2TP-MIB::l2tpTunnelConfigReassemblyTO

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.95.1.4.1.12.1
snmpget -v2c -c public <target> L2TP-MIB::l2tpTunnelConfigReassemblyTO.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.95.1.4.1.12.1 s <value>

Start monitoring Vendor-neutral IETF standard, RFC 3371 (L2TP access concentrators/network servers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the L2TP-MIB::l2tpTunnelConfigReassemblyTO OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard, RFC 3371 (L2TP access concentrators/network servers) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.95l2tpL2TP-MIB
1.3.6.1.2.1.10.95.1l2tpObjectsL2TP-MIB
1.3.6.1.2.1.10.95.1.4l2tpTunnelConfigTableL2TP-MIB
1.3.6.1.2.1.10.95.1.4.1l2tpTunnelConfigEntryL2TP-MIB
1.3.6.1.2.1.10.95.1.4.1.12l2tpTunnelConfigReassemblyTOL2TP-MIB