All MIBs › L2TP-MIB › l2tpDrainTunnels
l2tpDrainTunnels
Module: L2TP-MIB
OID (symbolic): L2TP-MIB::l2tpDrainTunnels
OID (numeric): 1.3.6.1.2.1.10.95.1.1.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Setting this object to 'true' will prevent any new tunnels and/or sessions to be either initiated or accepted but does NOT disconnect any active tunnels/sessions. Setting this object to true(1) causes all domains and their respective tunnels to transition to the draining state. Note that when this occurs the 'xxxDraining' status objects of the domains and their tunnels should reflect that they are 'draining'. Setting this object has no affect on the domains or their tunnels 'xxxDrainTunnels' configuration objects. To cancel a drain this object should be set to false(2). The object l2tpDrainingTunnels reflects the current L2TP draining state. The value of this object must be maintained in non-volatile memory.
What is l2tpDrainTunnels?
Puts the whole device into 'drain' mode: setting it true blocks any new tunnels or sessions from starting while letting existing ones keep running until they end naturally, the operational equivalent of gracefully taking a device out of service; check l2tpDrainingTunnels for the resulting state, and set this back to false to cancel the drain.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.95.1.1.1.2 snmpwalk -v2c -c public <target> L2TP-MIB::l2tpDrainTunnels
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.95.1.1.1.2.1 snmpget -v2c -c public <target> L2TP-MIB::l2tpDrainTunnels.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.95.1.1.1.2.1 s <value>
Start monitoring Vendor-neutral IETF standard, RFC 3371 (L2TP access concentrators/network servers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the L2TP-MIB::l2tpDrainTunnels OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard, RFC 3371 (L2TP access concentrators/network servers) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.95 | l2tp | L2TP-MIB |
| 1.3.6.1.2.1.10.95.1 | l2tpObjects | L2TP-MIB |
| 1.3.6.1.2.1.10.95.1.1 | l2tpScalar | L2TP-MIB |
| 1.3.6.1.2.1.10.95.1.1.1 | l2tpConfig | L2TP-MIB |
| 1.3.6.1.2.1.10.95.1.1.1.2 | l2tpDrainTunnels | L2TP-MIB |