All MIBs › Juniper-SNMP-MIB › juniSnmpTrapSeverityFilter
juniSnmpTrapSeverityFilter
Module: Juniper-SNMP-MIB
OID (symbolic): Juniper-SNMP-MIB::juniSnmpTrapSeverityFilter
OID (numeric): 1.3.6.1.4.1.4874.2.2.16.1.3.17.1.2
Node type: OBJECT-TYPE
Type: JuniTrapSeverity
Access: read-write
Description: Traps flow through two levels of filtering: severity of a particular trap category and trap destination. If the severity of a particular category is not defined, global trap severity is used for computation. The value of this object defines trap-category based minimum severity level, a trap must have in order to be forwarded for the destination level trap filtering. A trap will be discarded and counted in juniSnmpTrapGlobalDiscards if its severity level is less than the value of this object. For security reasons, �Mirror� category will not be allowed to be configured through SNMP. Only those trap categories which are configured using per category based trap severity filter are displayed as part of this table. If the value of juniSnmpTrapGlobalSeverityFilter is modified, it will overwrite all the values specified in this table.
What is juniSnmpTrapSeverityFilter?
Sets the minimum severity a trap of this specific category must have to pass category-level filtering before per-host filtering is applied; if unset for a category, the agent-wide juniSnmpTrapGlobalSeverityFilter applies instead, and changing that global value overwrites all per-category settings in this table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.16.1.3.17.1.2 snmpwalk -v2c -c public <target> Juniper-SNMP-MIB::juniSnmpTrapSeverityFilter
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.16.1.3.17.1.2.1 snmpget -v2c -c public <target> Juniper-SNMP-MIB::juniSnmpTrapSeverityFilter.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.16.1.3.17.1.2.1 s <value>
Start monitoring Juniper E-series router (SNMP management access configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-SNMP-MIB::juniSnmpTrapSeverityFilter OID value, configure state conditions and alerts, and monitor any Juniper E-series router (SNMP management access configuration) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.16 | juniSnmpMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.16.1 | juniSnmpObjects | Juniper-SNMP-MIB |
| 1.3.6.1.4.1.4874.2.2.16.1.3 | juniSnmpTrap | Juniper-SNMP-MIB |
| 1.3.6.1.4.1.4874.2.2.16.1.3.17 | juniSnmpTrapSeverityFilterTable | Juniper-SNMP-MIB |
| 1.3.6.1.4.1.4874.2.2.16.1.3.17.1 | juniSnmpTrapSeverityFilterEntry | Juniper-SNMP-MIB |
| 1.3.6.1.4.1.4874.2.2.16.1.3.17.1.2 | juniSnmpTrapSeverityFilter | Juniper-SNMP-MIB |