All MIBs › Juniper-SNMP-MIB › juniSnmpIntfCompCompressed
juniSnmpIntfCompCompressed
Module: Juniper-SNMP-MIB
OID (symbolic): Juniper-SNMP-MIB::juniSnmpIntfCompCompressed
OID (numeric): 1.3.6.1.4.1.4874.2.2.16.1.1.3.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: true(1) - the standard ifTable, ifXTable and ifStackTable contain a subset of interface types. Certain interface types like HDLC and IP and others are excluded from the standard tables but are manageable from proprietary MIBs. false(2) - the standard ifTable, ifXTable and ifStackTable contain entries for every standard and proprietary interface type supported by this system.
This configuration is applicable to all interface related tables until interface compression based on interface table-types is applied. If interface table-type based compression is applied, get operation on this object will correspond only to ifTable/ifXTable/juniIfTable and set operation on this object will fail.
What is juniSnmpIntfCompCompressed?
Toggles whether the standard interface tables show only a filtered subset of interface types (true) or every supported type including HDLC/IP (false); once table-type-based compression (juniSnmpIntfCompTable) is configured, this object only affects ifTable/ifXTable/juniIfTable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.16.1.1.3.1 snmpwalk -v2c -c public <target> Juniper-SNMP-MIB::juniSnmpIntfCompCompressed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.16.1.1.3.1.1 snmpget -v2c -c public <target> Juniper-SNMP-MIB::juniSnmpIntfCompCompressed.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.16.1.1.3.1.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> juniSnmpIntfCompCompressed.1
Start monitoring Juniper E-series router (SNMP management access configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-SNMP-MIB::juniSnmpIntfCompCompressed OID value, configure state conditions and alerts, and monitor any Juniper E-series router (SNMP management access configuration) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.16 | juniSnmpMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.16.1 | juniSnmpObjects | Juniper-SNMP-MIB |
| 1.3.6.1.4.1.4874.2.2.16.1.1 | juniSnmpGeneral | Juniper-SNMP-MIB |
| 1.3.6.1.4.1.4874.2.2.16.1.1.3 | juniSnmpInterfaceCompress | Juniper-SNMP-MIB |
| 1.3.6.1.4.1.4874.2.2.16.1.1.3.1 | juniSnmpIntfCompCompressed | Juniper-SNMP-MIB |