All MIBs › Juniper-IPsec-Tunnel-MIB › juniIpsecTunnelRemoteEndPt
juniIpsecTunnelRemoteEndPt
Module: Juniper-IPsec-Tunnel-MIB
OID (symbolic): Juniper-IPsec-Tunnel-MIB::juniIpsecTunnelRemoteEndPt
OID (numeric): 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.6
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-only
Description: The tunnel remote endpoint.
What is juniIpsecTunnelRemoteEndPt?
This read-only value is the tunnel's remote peer's outer IP address, the destination for encapsulated IPsec packets. Admins compare this against the expected peer address when troubleshooting a tunnel that isn't establishing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.6 snmpwalk -v2c -c public <target> Juniper-IPsec-Tunnel-MIB::juniIpsecTunnelRemoteEndPt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.6.1 snmpget -v2c -c public <target> Juniper-IPsec-Tunnel-MIB::juniIpsecTunnelRemoteEndPt.1
Start monitoring Juniper Networks E-series (ERX) edge router (IPsec VPN tunnel interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-IPsec-Tunnel-MIB::juniIpsecTunnelRemoteEndPt OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series (ERX) edge router (IPsec VPN tunnel interfaces) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.70 | juniIpsecTunnelMIB | Juniper-IPsec-Tunnel-MIB |
| 1.3.6.1.4.1.4874.2.2.70.1 | juniIpsecObjects | Juniper-IPsec-Tunnel-MIB |
| 1.3.6.1.4.1.4874.2.2.70.1.1 | juniIpsecTunnel | Juniper-IPsec-Tunnel-MIB |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2 | juniIpsecTunnelInterfaceTable | Juniper-IPsec-Tunnel-MIB |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1 | juniIpsecTunnelInterfaceEntry | Juniper-IPsec-Tunnel-MIB |
| 1.3.6.1.4.1.4874.2.2.70.1.1.2.1.6 | juniIpsecTunnelRemoteEndPt | Juniper-IPsec-Tunnel-MIB |