All MIBs › Juniper-ETHERNET-MIB › juniEthernetIfDuplexMode
juniEthernetIfDuplexMode
Module: Juniper-ETHERNET-MIB
OID (symbolic): Juniper-ETHERNET-MIB::juniEthernetIfDuplexMode
OID (numeric): 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The configured duplex setting for this ethernet interface. The operational value is reported in this table entry's corresponding juniEthernetIfOperDuplexMode object.
NOTE, configuration dependency:
Setting this object to values other than 'autoDuplex' takes effect only when the corresponding juniEthernetIfSpeed object is simultaneously set to other than 'autoNegotiate'.
Otherwise (i.e. this object is set to 'autoDuplex', AND/OR corresponding juniEthernetIfSpeed object is set to 'autoNegotiate'), duplex mode is negotiated.
What is juniEthernetIfDuplexMode?
Sets the configured duplex mode for this Ethernet interface -- auto, half, or full duplex (default auto); a non-auto value only takes effect if juniEthernetIfSpeed is also set to a fixed speed, otherwise duplex is negotiated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.2 snmpwalk -v2c -c public <target> Juniper-ETHERNET-MIB::juniEthernetIfDuplexMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.2.1 snmpget -v2c -c public <target> Juniper-ETHERNET-MIB::juniEthernetIfDuplexMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.2.1 i <value>
Start monitoring Juniper Networks router (Ethernet interfaces/sub-interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-ETHERNET-MIB::juniEthernetIfDuplexMode OID value, configure state conditions and alerts, and monitor any Juniper Networks router (Ethernet interfaces/sub-interfaces) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.34 | juniEthernetMIB | Juniper-ETHERNET-MIB |
| 1.3.6.1.4.1.4874.2.2.34.1 | juniEthernetObjects | Juniper-ETHERNET-MIB |
| 1.3.6.1.4.1.4874.2.2.34.1.1 | juniEthernetIfLayer | Juniper-ETHERNET-MIB |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1 | juniEthernetIfTable | Juniper-ETHERNET-MIB |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1 | juniEthernetIfEntry | Juniper-ETHERNET-MIB |
| 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.2 | juniEthernetIfDuplexMode | Juniper-ETHERNET-MIB |