Juniper-DOS-PROTECTION-PLATFORM-MIB :: juniDosProtectionScfdsSlotFlowClearEntry

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Juniper-DOS-PROTECTION-PLATFORM-MIB › juniDosProtectionScfdsSlotFlowClearEntry

juniDosProtectionScfdsSlotFlowClearEntry

Module: Juniper-DOS-PROTECTION-PLATFORM-MIB

OID (symbolic): Juniper-DOS-PROTECTION-PLATFORM-MIB::juniDosProtectionScfdsSlotFlowClearEntry

OID (numeric): 1.3.6.1.4.1.4874.2.2.81.1.1.2.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When set to clear(1), the suspicious control flow is removed from the suspicious control flow table. When set to ok(0), there is no effect and the suspicious control flow is unchanged.

When read, always returns a value of ok(0).

What is juniDosProtectionScfdsSlotFlowClearEntry?

Obsolete: setting this to clear(1) removed a suspicious control flow entry from this now-deprecated table; reading it always returned ok(0). An admin should use juniDosProtectionScfdsSlotFlowMacClearEntry instead on current devices to clear a suspicious flow.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.81.1.1.2.1.10
snmpwalk -v2c -c public <target> Juniper-DOS-PROTECTION-PLATFORM-MIB::juniDosProtectionScfdsSlotFlowClearEntry

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.81.1.1.2.1.10.1
snmpget -v2c -c public <target> Juniper-DOS-PROTECTION-PLATFORM-MIB::juniDosProtectionScfdsSlotFlowClearEntry.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.81.1.1.2.1.10.1 i <value>

Start monitoring Juniper E-series broadband access router (hardware-accelerated DoS protection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-DOS-PROTECTION-PLATFORM-MIB::juniDosProtectionScfdsSlotFlowClearEntry OID value, configure state conditions and alerts, and monitor any Juniper E-series broadband access router (hardware-accelerated DoS protection) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.81juniDosProtectionPlatformMIBJuniper-DOS-PROTECTION-PLATFORM-MIB
1.3.6.1.4.1.4874.2.2.81.1juniDosProtectionPlatformObjectsJuniper-DOS-PROTECTION-PLATFORM-MIB
1.3.6.1.4.1.4874.2.2.81.1.1juniDosProtectionPlatformScfdsGroupJuniper-DOS-PROTECTION-PLATFORM-MIB
1.3.6.1.4.1.4874.2.2.81.1.1.2juniDosProtectionScfdsSlotFlowTableJuniper-DOS-PROTECTION-PLATFORM-MIB
1.3.6.1.4.1.4874.2.2.81.1.1.2.1juniDosProtectionScfdsSlotFlowEntryJuniper-DOS-PROTECTION-PLATFORM-MIB
1.3.6.1.4.1.4874.2.2.81.1.1.2.1.10juniDosProtectionScfdsSlotFlowClearEntryJuniper-DOS-PROTECTION-PLATFORM-MIB