All MIBs › Juniper-ADDRESS-POOL-MIB › juniAddressPoolNextPoolProfileIndex
juniAddressPoolNextPoolProfileIndex
Module: Juniper-ADDRESS-POOL-MIB
OID (symbolic): Juniper-ADDRESS-POOL-MIB::juniAddressPoolNextPoolProfileIndex
OID (numeric): 1.3.6.1.4.1.4874.2.2.21.1.1.1.1.12
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Coordinate juniAddressPoolProfileIndex value allocation for entries in juniAddressPoolProfileTable.
A GET of this object returns the next available juniAddressPoolProfileIndex value to be used to create an entry in the associated juniAddressPoolProfileTable; or zero, if no valid juniAddressPoolProfileIndex is available. This object returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that a new index allocation is unintended.
What is juniAddressPoolNextPoolProfileIndex?
Returns the next available juniAddressPoolProfileIndex value to use when creating a new address range entry for this pool in juniAddressPoolProfileTable, or zero if none is available. GET this before adding a new range to the pool so you use a valid, non-conflicting index.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.21.1.1.1.1.12 snmpwalk -v2c -c public <target> Juniper-ADDRESS-POOL-MIB::juniAddressPoolNextPoolProfileIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.21.1.1.1.1.12.1 snmpget -v2c -c public <target> Juniper-ADDRESS-POOL-MIB::juniAddressPoolNextPoolProfileIndex.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> juniAddressPoolNextPoolProfileIndex.1
Start monitoring Juniper E-series broadband access router (IP address pool utilization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-ADDRESS-POOL-MIB::juniAddressPoolNextPoolProfileIndex OID value, configure state conditions and alerts, and monitor any Juniper E-series broadband access router (IP address pool utilization) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.21 | juniAddressPoolMIB | Juniper-ADDRESS-POOL-MIB |
| 1.3.6.1.4.1.4874.2.2.21.1 | juniAddressPoolObjects | Juniper-ADDRESS-POOL-MIB |
| 1.3.6.1.4.1.4874.2.2.21.1.1 | juniAddressPool | Juniper-ADDRESS-POOL-MIB |
| 1.3.6.1.4.1.4874.2.2.21.1.1.1 | juniAddressPoolTable | Juniper-ADDRESS-POOL-MIB |
| 1.3.6.1.4.1.4874.2.2.21.1.1.1.1 | juniAddressPoolEntry | Juniper-ADDRESS-POOL-MIB |
| 1.3.6.1.4.1.4874.2.2.21.1.1.1.1.12 | juniAddressPoolNextPoolProfileIndex | Juniper-ADDRESS-POOL-MIB |