Jetnet4508V2 :: rstpPerPortCfgAdminP2P

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › Jetnet4508V2 › rstpPerPortCfgAdminP2P

rstpPerPortCfgAdminP2P

Module: Jetnet4508V2

OID (symbolic): Jetnet4508V2::rstpPerPortCfgAdminP2P

OID (numeric): 1.3.6.1.4.1.24062.2.2.17.4.2.6.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or can be connected to two or more Bridges(i.e., it is served by a shared medium LAN segment). The adminPointToPointMAC allow the p2p status of the link to be manipulated adminitratively.

What is rstpPerPortCfgAdminP2P?

This administratively sets whether this port's link is treated as auto(1), point2Point(2), shared(3), or notSupport(4) for RSTP's rapid-transition logic, since a point-to-point link can transition to forwarding faster than a shared-medium one. An admin forces point2Point(2) on a direct switch-to-switch uplink to guarantee it gets the fast-transition behavior even if auto-detection would otherwise miss it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.24062.2.2.17.4.2.6.1.4
snmpwalk -v2c -c public <target> Jetnet4508V2::rstpPerPortCfgAdminP2P

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.24062.2.2.17.4.2.6.1.4.1
snmpget -v2c -c public <target> Jetnet4508V2::rstpPerPortCfgAdminP2P.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.24062.2.2.17.4.2.6.1.4.1 i <value>

Start monitoring Korenix JetNet 4508 industrial Ethernet rail switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Jetnet4508V2::rstpPerPortCfgAdminP2P OID value, configure state conditions and alerts, and monitor any Korenix JetNet 4508 industrial Ethernet rail switch from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.24062korenixJetnet4508V2
1.3.6.1.4.1.24062.2productsJetnet4508V2
1.3.6.1.4.1.24062.2.2managedFESwitchJetnet4508V2
1.3.6.1.4.1.24062.2.2.17jetnet4508V2Jetnet4508V2
1.3.6.1.4.1.24062.2.2.17.4networkRedundancyJetnet4508V2
1.3.6.1.4.1.24062.2.2.17.4.2rstpJetnet4508V2
1.3.6.1.4.1.24062.2.2.17.4.2.6rstpPerPortCfgTableJetnet4508V2
1.3.6.1.4.1.24062.2.2.17.4.2.6.1rstpPerPortCfgEntryJetnet4508V2
1.3.6.1.4.1.24062.2.2.17.4.2.6.1.4rstpPerPortCfgAdminP2PJetnet4508V2