Jetnet4508V2 :: portCtrlSpeedAndDuplex

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › Jetnet4508V2 › portCtrlSpeedAndDuplex

portCtrlSpeedAndDuplex

Module: Jetnet4508V2

OID (symbolic): Jetnet4508V2::portCtrlSpeedAndDuplex

OID (numeric): 1.3.6.1.4.1.24062.2.2.17.3.1.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Speed and duplex configuraion.

Different speed and duplex modes are available. There are speeds: 100 megabits per second (Fast Ethernet), and 10 megabits per second (Legacy Ethernet). Full-duplex allows packets to be transmitted in both directions at the same time, while half-duplex allows a device to either transmit or receive, but not both at the same time. Full-duplex may have double bandwidth than half-duplex.

You can configure manually from the possible options, listed from best to worst: 100Mb full-duplex(5) 100Mb half-duplex(4) 10Mb full-duplex(3) 10Mb half-duplex(2)

Set to autoNegotiation(1) to allow the two interfaces on the link to exchange the capabilities and characteristics of the each side, and select the best operating mode automatically when a cable is plugged in.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.24062.2.2.17.3.1.1.1.4
snmpwalk -v2c -c public <target> Jetnet4508V2::portCtrlSpeedAndDuplex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.24062.2.2.17.3.1.1.1.4.1
snmpget -v2c -c public <target> Jetnet4508V2::portCtrlSpeedAndDuplex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.24062.2.2.17.3.1.1.1.4.1 i <value>

Start monitoring Korenix JetNet 4508 industrial Ethernet rail switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Jetnet4508V2::portCtrlSpeedAndDuplex OID value, configure state conditions and alerts, and monitor any Korenix JetNet 4508 industrial Ethernet rail switch from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.24062korenixJetnet4508V2
1.3.6.1.4.1.24062.2productsJetnet4508V2
1.3.6.1.4.1.24062.2.2managedFESwitchJetnet4508V2
1.3.6.1.4.1.24062.2.2.17jetnet4508V2Jetnet4508V2
1.3.6.1.4.1.24062.2.2.17.3portConfigurationJetnet4508V2
1.3.6.1.4.1.24062.2.2.17.3.1portControlJetnet4508V2
1.3.6.1.4.1.24062.2.2.17.3.1.1portCtrlTableJetnet4508V2
1.3.6.1.4.1.24062.2.2.17.3.1.1.1portCtrlEntryJetnet4508V2
1.3.6.1.4.1.24062.2.2.17.3.1.1.1.4portCtrlSpeedAndDuplexJetnet4508V2