All MIBs › JUNIPER-SECURE-ACCESS-PORT-MIB › jnxSecAccessdsIfRateLimit
jnxSecAccessdsIfRateLimit
Module: JUNIPER-SECURE-ACCESS-PORT-MIB
OID (symbolic): JUNIPER-SECURE-ACCESS-PORT-MIB::jnxSecAccessdsIfRateLimit
OID (numeric): 1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object indicates rate limit value for DHCP Snooping purpose. If the value of this object is 0, no rate limit is applied for DHCP traffic at this interface.
What is jnxSecAccessdsIfRateLimit?
This read-only value, in packets per second, reports the rate limit applied to DHCP traffic on the interface for DHCP Snooping purposes, with 0 meaning no rate limit is applied. An admin checks it to confirm the interface is protected against a flood of DHCP packets, which could otherwise be used to overwhelm the switch's snooping process. For example, an admin hardening an access port against a DHCP-flood style DoS would expect this value to be set above 0 rather than left unlimited.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.2 snmpwalk -v2c -c public <target> JUNIPER-SECURE-ACCESS-PORT-MIB::jnxSecAccessdsIfRateLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.2.1 snmpget -v2c -c public <target> JUNIPER-SECURE-ACCESS-PORT-MIB::jnxSecAccessdsIfRateLimit.1
Start monitoring Juniper Networks EX-series switch (Secure Access Port: DHCP snooping/DAI/storm control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SECURE-ACCESS-PORT-MIB::jnxSecAccessdsIfRateLimit OID value, configure state conditions and alerts, and monitor any Juniper Networks EX-series switch (Secure Access Port: DHCP snooping/DAI/storm control) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.40 | jnxExMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.40.1 | jnxExSwitching | JUNIPER-EX-SMI |
| 1.3.6.1.4.1.2636.3.40.1.2 | jnxExSecureAccessPort | JUNIPER-EX-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.40.1.2.1 | jnxExSecureAccessPortMIB | JUNIPER-SECURE-ACCESS-PORT-MIB |
| 1.3.6.1.4.1.2636.3.40.1.2.1.1 | jnxSecAccessPortMIBObjects | JUNIPER-SECURE-ACCESS-PORT-MIB |
| 1.3.6.1.4.1.2636.3.40.1.2.1.1.2 | jnxSecAccessPortIfTable | JUNIPER-SECURE-ACCESS-PORT-MIB |
| 1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1 | jnxSecAccessPortIfEntry | JUNIPER-SECURE-ACCESS-PORT-MIB |
| 1.3.6.1.4.1.2636.3.40.1.2.1.1.2.1.2 | jnxSecAccessdsIfRateLimit | JUNIPER-SECURE-ACCESS-PORT-MIB |