All MIBs › JUNIPER-L2CP-FEATURES-MIB › jnxL2cpBpduProtectDisableTimeout
jnxL2cpBpduProtectDisableTimeout
Module: JUNIPER-L2CP-FEATURES-MIB
OID (symbolic): JUNIPER-L2CP-FEATURES-MIB::jnxL2cpBpduProtectDisableTimeout
OID (numeric): 1.3.6.1.4.1.2636.3.53.1.1.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Returns the value of time (in seconds) after which a port on which BPDU error was detected will be re-enabled. A returned value of 0 indicates that port will not be re-enabled automatically.
What is jnxL2cpBpduProtectDisableTimeout?
This object reports the number of seconds after which a port disabled by BPDU Protect will automatically be re-enabled, with a value of 0 meaning the port must be manually re-enabled instead. Admins check this setting to know whether they need to manually intervene after a BPDU Protect event or whether the port will recover on its own. For example, a value of 300 means a port shut down by BPDU Protect will automatically come back up 5 minutes later, while a value of 0 requires an admin to manually clear the condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.53.1.1.2.2 snmpwalk -v2c -c public <target> JUNIPER-L2CP-FEATURES-MIB::jnxL2cpBpduProtectDisableTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.53.1.1.2.2.1 snmpget -v2c -c public <target> JUNIPER-L2CP-FEATURES-MIB::jnxL2cpBpduProtectDisableTimeout.1
Start monitoring Juniper Networks EX/QFX switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-L2CP-FEATURES-MIB::jnxL2cpBpduProtectDisableTimeout OID value, configure state conditions and alerts, and monitor any Juniper Networks EX/QFX switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.53 | jnxL2cpMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.53.1 | jnxL2cpFeaturesMIB | JUNIPER-L2CP-FEATURES-MIB |
| 1.3.6.1.4.1.2636.3.53.1.1 | jnxL2cpObjects | JUNIPER-L2CP-FEATURES-MIB |
| 1.3.6.1.4.1.2636.3.53.1.1.2 | jnxL2cpBpduProtectObjects | JUNIPER-L2CP-FEATURES-MIB |
| 1.3.6.1.4.1.2636.3.53.1.1.2.2 | jnxL2cpBpduProtectDisableTimeout | JUNIPER-L2CP-FEATURES-MIB |