All MIBs › JUNIPER-IF-MIB › ifJnxSramErrors
ifJnxSramErrors
Module: JUNIPER-IF-MIB
OID (symbolic): JUNIPER-IF-MIB::ifJnxSramErrors
OID (numeric): 1.3.6.1.4.1.2636.3.3.1.1.23
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: SRAM errors: This counter increments when a hardware error has occurred in the SRAM on the PIC.
What is ifJnxSramErrors?
Increments whenever a hardware error occurs in the SRAM on this interface's PIC, a direct signal of failing or marginal memory hardware on that physical interface card rather than a traffic-driven condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.3.1.1.23 snmpwalk -v2c -c public <target> JUNIPER-IF-MIB::ifJnxSramErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.3.1.1.23.1 snmpget -v2c -c public <target> JUNIPER-IF-MIB::ifJnxSramErrors.1
Start monitoring Juniper Networks router/switch (ifTable extension) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-IF-MIB::ifJnxSramErrors OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch (ifTable extension) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.3 | ifJnx | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.1 | ifJnxTable | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.1.1 | ifJnxEntry | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.1.1.23 | ifJnxSramErrors | JUNIPER-IF-MIB |