All MIBs › JUNIPER-IF-MIB › ifJnxOutPolMLowPkts
ifJnxOutPolMLowPkts
Module: JUNIPER-IF-MIB
OID (symbolic): JUNIPER-IF-MIB::ifJnxOutPolMLowPkts
OID (numeric): 1.3.6.1.4.1.2636.3.3.4.1.20
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: Logical Interface Policer Input Medium Low Pkts
What is ifJnxOutPolMLowPkts?
Counts packets of outbound traffic on this logical interface classified into the policer's 'medium-low' conformance level; note the source MIB's own DESCRIPTION text for this object mislabels it as 'Input' rather than 'Output', but its OID name and position in the SEQUENCE place it firmly on the output-policer side alongside ifJnxOutPolMLowOctets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.3.4.1.20 snmpwalk -v2c -c public <target> JUNIPER-IF-MIB::ifJnxOutPolMLowPkts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.3.4.1.20.1 snmpget -v2c -c public <target> JUNIPER-IF-MIB::ifJnxOutPolMLowPkts.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ifJnxOutPolMLowPkts.1
Start monitoring Juniper Networks router/switch (ifTable extension) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-IF-MIB::ifJnxOutPolMLowPkts OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch (ifTable extension) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.3 | ifJnx | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.4 | ifJnxPolTable | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.4.1 | ifJnxPolEntry | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.4.1.20 | ifJnxOutPolMLowPkts | JUNIPER-IF-MIB |