JUNIPER-IF-MIB :: ifJnxInHslCrcErrors

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsJUNIPER-IF-MIBifJnxInHslCrcErrors

ifJnxInHslCrcErrors

Module: JUNIPER-IF-MIB

OID (symbolic): JUNIPER-IF-MIB::ifJnxInHslCrcErrors

OID (numeric): 1.3.6.1.4.1.2636.3.3.1.1.15

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: HS Link CRC Errors: The number of CRC errors on the high-speed links between the ASICs responsible for handling the router interfaces while receiving packets.

What is ifJnxInHslCrcErrors?

Counts CRC errors on the high-speed internal links between the ASICs that handle this router's interfaces, specifically while receiving packets; a rising count points to an internal hardware/backplane issue rather than an external cabling problem.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.3.1.1.15
snmpwalk -v2c -c public <target> JUNIPER-IF-MIB::ifJnxInHslCrcErrors

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.3.1.1.15.1
snmpget -v2c -c public <target> JUNIPER-IF-MIB::ifJnxInHslCrcErrors.1

Start monitoring Juniper Networks router/switch (ifTable extension) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-IF-MIB::ifJnxInHslCrcErrors OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch (ifTable extension) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.3jnxMibsJUNIPER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.2636.3.3ifJnxJUNIPER-IF-MIB
1.3.6.1.4.1.2636.3.3.1ifJnxTableJUNIPER-IF-MIB
1.3.6.1.4.1.2636.3.3.1.1ifJnxEntryJUNIPER-IF-MIB
1.3.6.1.4.1.2636.3.3.1.1.15ifJnxInHslCrcErrorsJUNIPER-IF-MIB