All MIBs › JUNIPER-IF-MIB › ifJnxInGiants
ifJnxInGiants
Module: JUNIPER-IF-MIB
OID (symbolic): JUNIPER-IF-MIB::ifJnxInGiants
OID (numeric): 1.3.6.1.4.1.2636.3.3.1.1.13
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: Giants: Frames received that are larger than the giant threshold.
What is ifJnxInGiants?
Counts frames received that were larger than the configured 'giant' threshold, which can indicate an MTU mismatch or a misbehaving device sending oversized frames into this interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.3.1.1.13 snmpwalk -v2c -c public <target> JUNIPER-IF-MIB::ifJnxInGiants
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.3.1.1.13.1 snmpget -v2c -c public <target> JUNIPER-IF-MIB::ifJnxInGiants.1
Start monitoring Juniper Networks router/switch (ifTable extension) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-IF-MIB::ifJnxInGiants OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch (ifTable extension) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.3 | ifJnx | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.1 | ifJnxTable | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.1.1 | ifJnxEntry | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.1.1.13 | ifJnxInGiants | JUNIPER-IF-MIB |