All MIBs › JUNIPER-IF-MIB › ifJnxFcsErrors
ifJnxFcsErrors
Module: JUNIPER-IF-MIB
OID (symbolic): JUNIPER-IF-MIB::ifJnxFcsErrors
OID (numeric): 1.3.6.1.4.1.2636.3.3.1.1.33
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: FCS Errors: The number of FCS errors
What is ifJnxFcsErrors?
Counts frame check sequence (FCS) errors detected on this interface; like ifJnxCrcErrors it was added in the 2011 revision, and an increase in either counter fires the ifJnxErrors notification defined in this same MIB.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.3.1.1.33 snmpwalk -v2c -c public <target> JUNIPER-IF-MIB::ifJnxFcsErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.3.1.1.33.1 snmpget -v2c -c public <target> JUNIPER-IF-MIB::ifJnxFcsErrors.1
Start monitoring Juniper Networks router/switch (ifTable extension) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-IF-MIB::ifJnxFcsErrors OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch (ifTable extension) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.3 | ifJnx | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.1 | ifJnxTable | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.1.1 | ifJnxEntry | JUNIPER-IF-MIB |
| 1.3.6.1.4.1.2636.3.3.1.1.33 | ifJnxFcsErrors | JUNIPER-IF-MIB |