All MIBs › JUNIPER-ALARM-MIB › jnxRedAlarmState
jnxRedAlarmState
Module: JUNIPER-ALARM-MIB
OID (symbolic): JUNIPER-ALARM-MIB::jnxRedAlarmState
OID (numeric): 1.3.6.1.4.1.2636.3.4.2.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The red alarm indication on the craft interface panel.
The red alarm is on when there is some system failure or power supply failure or the system is experiencing a hardware malfunction or some threshold is being exceeded.
This red alarm state could be turned off by the ACO/LT (Alarm Cut Off / Lamp Test) button on the front panel module.
What is jnxRedAlarmState?
This read-only INTEGER, other(1), off(2), or on(3), reports whether the red (critical) alarm is currently lit on the router's craft interface panel. It signals to an admin a serious condition such as a system or power supply failure, hardware malfunction, or an exceeded threshold, the highest severity alarm level on the panel. An admin seeing jnxRedAlarmState as on(3) would treat it as an urgent, service-affecting condition requiring immediate investigation, unlike the lower-severity yellow alarm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.4.2.3.1 snmpwalk -v2c -c public <target> JUNIPER-ALARM-MIB::jnxRedAlarmState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.4.2.3.1.1 snmpget -v2c -c public <target> JUNIPER-ALARM-MIB::jnxRedAlarmState.1
Start monitoring Juniper Networks router/switch (chassis yellow/red alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-ALARM-MIB::jnxRedAlarmState OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch (chassis yellow/red alarm status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.4 | jnxAlarms | JUNIPER-ALARM-MIB |
| 1.3.6.1.4.1.2636.3.4.2 | jnxCraftAlarms | JUNIPER-ALARM-MIB |
| 1.3.6.1.4.1.2636.3.4.2.3 | jnxRedAlarms | JUNIPER-ALARM-MIB |
| 1.3.6.1.4.1.2636.3.4.2.3.1 | jnxRedAlarmState | JUNIPER-ALARM-MIB |