All MIBs › JUNIPER-ALARM-MIB › jnxAlarmRelayMode
jnxAlarmRelayMode
Module: JUNIPER-ALARM-MIB
OID (symbolic): JUNIPER-ALARM-MIB::jnxAlarmRelayMode
OID (numeric): 1.3.6.1.4.1.2636.3.4.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The alarm relay mode of the craft interface panel for both yellow and red alarms.
Both yellow and red alarms could be cut off by a front panel Alarm Cutoff / Lamp Test (ACO/LT) button.
In the pass-on mode, the alarm relay will be activated to pass on the yellow or red alarms. In the cut-off mode, both yellow and red alarms will be cut off from the alarm relays which are normally connected to audible sirens or visual flashing devices.
What is jnxAlarmRelayMode?
This read-only INTEGER, other(1), passOn(2), or cutOff(3), reports the current mode of the craft interface panel's alarm relay for both yellow and red alarms. An admin checks it to know whether active alarms are currently being passed on to external audible/visual alerting equipment or have been cut off, typically via the front-panel Alarm Cutoff/Lamp Test button. Seeing jnxAlarmRelayMode as cutOff(3) would explain to an admin why a known active alarm condition isn't triggering the external siren or beacon.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.4.2.1 snmpwalk -v2c -c public <target> JUNIPER-ALARM-MIB::jnxAlarmRelayMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.4.2.1.1 snmpget -v2c -c public <target> JUNIPER-ALARM-MIB::jnxAlarmRelayMode.1
Start monitoring Juniper Networks router/switch (chassis yellow/red alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-ALARM-MIB::jnxAlarmRelayMode OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch (chassis yellow/red alarm status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.4 | jnxAlarms | JUNIPER-ALARM-MIB |
| 1.3.6.1.4.1.2636.3.4.2 | jnxCraftAlarms | JUNIPER-ALARM-MIB |
| 1.3.6.1.4.1.2636.3.4.2.1 | jnxAlarmRelayMode | JUNIPER-ALARM-MIB |