All MIBs › IPsecT1-MIB › ipsecTrapCntlipsecTunnelStop
ipsecTrapCntlipsecTunnelStop
Module: IPsecT1-MIB
OID (symbolic): IPsecT1-MIB::ipsecTrapCntlipsecTunnelStop
OID (numeric): 1.3.6.1.4.1.2.6.168.1.1.1.1.6.8
Node type: OBJECT-TYPE
Type: TrapStatus
Access: read-write
Description: This object defines the administrative state of sending the ipsec Phase-2 Tunnel Stop TRAP
What is ipsecTrapCntlipsecTunnelStop?
Read-write switch (enabled or disabled; default disabled) controlling whether the device sends the Phase-2 tunnel stop trap. Enable it to be alerted when a data tunnel goes down. Set it per trap type so your trap receiver is not flooded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.168.1.1.1.1.6.8 snmpwalk -v2c -c public <target> IPsecT1-MIB::ipsecTrapCntlipsecTunnelStop
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.168.1.1.1.1.6.8.1 snmpget -v2c -c public <target> IPsecT1-MIB::ipsecTrapCntlipsecTunnelStop.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.168.1.1.1.1.6.8.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ipsecTrapCntlipsecTunnelStop.1
Start monitoring IPsec-capable router/firewall/VPN gateway (Tivoli/Cisco IPsec management tooling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPsecT1-MIB::ipsecTrapCntlipsecTunnelStop OID value, configure state conditions and alerts, and monitor any IPsec-capable router/firewall/VPN gateway (Tivoli/Cisco IPsec management tooling) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.168.1.1.1 | ipsecMIB | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1 | ipsecMIBObjects | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.6 | ipsecTrapCntl | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.6.8 | ipsecTrapCntlipsecTunnelStop | IPsecT1-MIB |