All MIBs › IPsecT1-MIB › ipsecSpiStatus
ipsecSpiStatus
Module: IPsecT1-MIB
OID (symbolic): IPsecT1-MIB::ipsecSpiStatus
OID (numeric): 1.3.6.1.4.1.2.6.168.1.1.1.1.3.4.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of the SPI.
What is ipsecSpiStatus?
State of this SPI: active (1) in current use, or expiring (2) being phased out as a rekey completes. A tunnel stuck with only expiring SPIs may be about to lose traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.168.1.1.1.1.3.4.1.5 snmpwalk -v2c -c public <target> IPsecT1-MIB::ipsecSpiStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.168.1.1.1.1.3.4.1.5.1 snmpget -v2c -c public <target> IPsecT1-MIB::ipsecSpiStatus.1
Start monitoring IPsec-capable router/firewall/VPN gateway (Tivoli/Cisco IPsec management tooling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPsecT1-MIB::ipsecSpiStatus OID value, configure state conditions and alerts, and monitor any IPsec-capable router/firewall/VPN gateway (Tivoli/Cisco IPsec management tooling) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.168.1.1.1 | ipsecMIB | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1 | ipsecMIBObjects | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.3 | ipsecPhaseTwo | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.3.4 | ipsecSpiTable | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.3.4.1 | ipsecSpiEntry | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.3.4.1.5 | ipsecSpiStatus | IPsecT1-MIB |