All MIBs › IPsecT1-MIB › ipsecFailReason
ipsecFailReason
Module: IPsecT1-MIB
OID (symbolic): IPsecT1-MIB::ipsecFailReason
OID (numeric): 1.3.6.1.4.1.2.6.168.1.1.1.1.5.3.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The reason for the failure. Possible reasons include: 1 = other 2 = internal error occurred 3 = peer encoding error 4 = proposal failure 5 = protocol use failure 6 = non-existent security association 7 = decryption failure 8 = encryption failure 9 = inbound authentication failure 10 = outbound authentication failure 11 = compression failure 12 = system capacity failure 13 = peer delete request was received 14 = contact with peer was lost 15 = sequence number rolled over 16 = operator requested termination.
What is ipsecFailReason?
Why this Phase-2 operation failed, as one of 16 codes such as internalError (2), proposalFailure (4), nonExistentSa (6), decryptFailure (7), inAuthFailure (9), outAuthFailure (10), sysCapExceeded (12) or peerLost (14). Read it first when an IPsec tunnel breaks: 4 usually means a proposal or policy mismatch and 6 an SA that one side has forgotten.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.168.1.1.1.1.5.3.1.1.2 snmpwalk -v2c -c public <target> IPsecT1-MIB::ipsecFailReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.168.1.1.1.1.5.3.1.1.2.1 snmpget -v2c -c public <target> IPsecT1-MIB::ipsecFailReason.1
Start monitoring IPsec-capable router/firewall/VPN gateway (Tivoli/Cisco IPsec management tooling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPsecT1-MIB::ipsecFailReason OID value, configure state conditions and alerts, and monitor any IPsec-capable router/firewall/VPN gateway (Tivoli/Cisco IPsec management tooling) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.168.1.1.1 | ipsecMIB | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1 | ipsecMIBObjects | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.5 | ipsecFailures | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.5.3 | ipsecFailPhaseTwo | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.5.3.1 | ipsecFailTable | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.5.3.1.1 | ipsecFailEntry | IPsecT1-MIB |
| 1.3.6.1.4.1.2.6.168.1.1.1.1.5.3.1.1.2 | ipsecFailReason | IPsecT1-MIB |