IPOA-MIB :: ipoaArpClientArpOutNaks

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsIPOA-MIBipoaArpClientArpOutNaks

ipoaArpClientArpOutNaks

Module: IPOA-MIB

OID (symbolic): IPOA-MIB::ipoaArpClientArpOutNaks

OID (numeric): 1.3.6.1.2.1.10.46.1.4.1.14

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: Total number of negative ATMARP replies sent by this client.

Classic IP and ARP over ATM does not require an ATMARP client to transmit an ATMARP_NAK upon receipt of an ATMARP request from another ATMARP client. However, implementation experience has shown that this error condition is somewhat easy to create inadvertently by configuring one ATMARP client with an ipoaArpRemoteSrvrTable entry containing an ipoaArpRemoteSrvrAtmAddr value which is the ATM address of another ATMARP client-only system.

If an ATMARP client supports the transmission of ATMARP_NAKs, then it should increment ipoaArpClientArpOutNaks each time it transmits an ATMARP_NAK. Otherwise, support of this object is considered optional.

What is ipoaArpClientArpOutNaks?

Counts negative ATMARP replies (NAKs) this client has sent; support is optional, but a rising count usually means another ATMARP client mistakenly has this system listed as an ATMARP server in its remote-server table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.46.1.4.1.14
snmpwalk -v2c -c public <target> IPOA-MIB::ipoaArpClientArpOutNaks

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.46.1.4.1.14.1
snmpget -v2c -c public <target> IPOA-MIB::ipoaArpClientArpOutNaks.1

Start monitoring Vendor-neutral IETF standard (ATM-attached routing equipment, Classical IP/ARP over ATM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPOA-MIB::ipoaArpClientArpOutNaks OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (ATM-attached routing equipment, Classical IP/ARP over ATM) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.46ipoaMIBIPOA-MIB
1.3.6.1.2.1.10.46.1ipoaObjectsIPOA-MIB
1.3.6.1.2.1.10.46.1.4ipoaArpClientTableIPOA-MIB
1.3.6.1.2.1.10.46.1.4.1ipoaArpClientEntryIPOA-MIB
1.3.6.1.2.1.10.46.1.4.1.14ipoaArpClientArpOutNaksIPOA-MIB