All MIBs › IPMROUTE-MIB › ipMRoute1InIfIndex
ipMRoute1InIfIndex
Module: IPMROUTE-MIB
OID (symbolic): IPMROUTE-MIB::ipMRoute1InIfIndex
OID (numeric): 1.3.6.1.3.60.1.1.2.1.5
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-only
Description: The value of ifIndex for the interface on which IP datagrams sent by these sources to this multicast address are received. A value of 0 indicates that datagrams are not subject to an incoming interface check, but may be accepted on multiple interfaces (e.g., in CBT).
What is ipMRoute1InIfIndex?
The ifIndex of the interface on which datagrams for this multicast route should arrive; a value of 0 means the incoming interface isn't checked and traffic may be accepted on multiple interfaces.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.60.1.1.2.1.5 snmpwalk -v2c -c public <target> IPMROUTE-MIB::ipMRoute1InIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.60.1.1.2.1.5.1 snmpget -v2c -c public <target> IPMROUTE-MIB::ipMRoute1InIfIndex.1
Start monitoring IP multicast-capable routers and switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPMROUTE-MIB::ipMRoute1InIfIndex OID value, configure state conditions and alerts, and monitor any IP multicast-capable routers and switches from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.60 | ipMRoute1MIB | IPMROUTE-MIB |
| 1.3.6.1.3.60.1 | ipMRoute1MIBObjects | IPMROUTE-MIB |
| 1.3.6.1.3.60.1.1 | ipMRoute1 | IPMROUTE-MIB |
| 1.3.6.1.3.60.1.1.2 | ipMRoute1Table | IPMROUTE-MIB |
| 1.3.6.1.3.60.1.1.2.1 | ipMRoute1Entry | IPMROUTE-MIB |
| 1.3.6.1.3.60.1.1.2.1.5 | ipMRoute1InIfIndex | IPMROUTE-MIB |