All MIBs › IPADv2-MIB › ipadSCADACfgInputTerminator
ipadSCADACfgInputTerminator
Module: IPADv2-MIB
OID (symbolic): IPADv2-MIB::ipadSCADACfgInputTerminator
OID (numeric): 1.3.6.1.4.1.321.100.1.16.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The SCADA input message terminator.
What is ipadSCADACfgInputTerminator?
This read-write object specifies the message terminator character or sequence used for SCADA input messages received by an IPAD device. Operators configure this to match the protocol expectations of their SCADA system. Different SCADA implementations use different terminators (like CR/LF, ETX), so this setting ensures proper message parsing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.16.1.1.4 snmpwalk -v2c -c public <target> IPADv2-MIB::ipadSCADACfgInputTerminator
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.16.1.1.4.1 snmpget -v2c -c public <target> IPADv2-MIB::ipadSCADACfgInputTerminator.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.16.1.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.321 | verilink | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100 | hbu | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100.1 | ipad | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.16 | ipadSCADAConfig | IPADv2-MIB |
| 1.3.6.1.4.1.321.100.1.16.1 | ipadSCADAConfigTable | IPADv2-MIB |
| 1.3.6.1.4.1.321.100.1.16.1.1 | ipadSCADAConfigTableEntry | IPADv2-MIB |
| 1.3.6.1.4.1.321.100.1.16.1.1.4 | ipadSCADACfgInputTerminator | IPADv2-MIB |