All MIBs › IPADv2-MIB › ipadPktSwCfgAutoIPMgmtAddr
ipadPktSwCfgAutoIPMgmtAddr
Module: IPADv2-MIB
OID (symbolic): IPADv2-MIB::ipadPktSwCfgAutoIPMgmtAddr
OID (numeric): 1.3.6.1.4.1.321.100.1.10.2.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Look for DLCI (980-995) and uses its IP address.
What is ipadPktSwCfgAutoIPMgmtAddr?
This OID configures the packet switch to automatically find a management IP address by looking at specific virtual circuit identifiers (DLCIs) in the network. This simplifies device configuration by auto-discovering the correct IP address. A network operator would enable this during initial setup to reduce manual configuration steps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.10.2.1.18 snmpwalk -v2c -c public <target> IPADv2-MIB::ipadPktSwCfgAutoIPMgmtAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.10.2.1.18.1 snmpget -v2c -c public <target> IPADv2-MIB::ipadPktSwCfgAutoIPMgmtAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.10.2.1.18.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.321 | verilink | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100 | hbu | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100.1 | ipad | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.10 | ipadPktSwitch | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.10.2 | ipadPktSwCfgTable | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.10.2.1 | ipadPktSwCfgTableEntry | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.10.2.1.18 | ipadPktSwCfgAutoIPMgmtAddr | IPADv2-MIB |