All MIBs › IPADv2-MIB › ipadOrigPingTimeout
ipadOrigPingTimeout
Module: IPADv2-MIB
OID (symbolic): IPADv2-MIB::ipadOrigPingTimeout
OID (numeric): 1.3.6.1.4.1.321.100.1.35.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Number of seconds to wait for a reply to a PING request message.
What is ipadOrigPingTimeout?
This read-write object sets the maximum number of seconds the IPAD device will wait for a response to a PING request message. Operators adjust this timeout based on network latency; shorter values mean faster failure detection but may cause false timeouts on slow networks. This is typically configured once during setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.35.3 snmpwalk -v2c -c public <target> IPADv2-MIB::ipadOrigPingTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.35.3.1 snmpget -v2c -c public <target> IPADv2-MIB::ipadOrigPingTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.35.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.321 | verilink | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100 | hbu | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100.1 | ipad | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.35 | ipadOrigPing | IPADv2-MIB |
| 1.3.6.1.4.1.321.100.1.35.3 | ipadOrigPingTimeout | IPADv2-MIB |