All MIBs › IPADv2-MIB › ipadOrigPingCommand
ipadOrigPingCommand
Module: IPADv2-MIB
OID (symbolic): IPADv2-MIB::ipadOrigPingCommand
OID (numeric): 1.3.6.1.4.1.321.100.1.35.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Action command to start/stop sending PING messages.
What is ipadOrigPingCommand?
This object allows a network management station to initiate PING diagnostic requests from the device, providing a way to test connectivity to a target IP address without direct access to the device's command line. When set, the device begins sending ICMP echo requests and collects results. Operations staff use this for remote diagnostic testing to verify reachability and measure latency.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.35.1 snmpwalk -v2c -c public <target> IPADv2-MIB::ipadOrigPingCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.35.1.1 snmpget -v2c -c public <target> IPADv2-MIB::ipadOrigPingCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.35.1.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.321 | verilink | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100 | hbu | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100.1 | ipad | IPAD-MIB |
| 1.3.6.1.4.1.321.100.1.35 | ipadOrigPing | IPADv2-MIB |
| 1.3.6.1.4.1.321.100.1.35.1 | ipadOrigPingCommand | IPADv2-MIB |