IPADv2-MIB :: ipadDS0ConfigHighUtilThreshold

MIB Reference — IPNetwork Monitor

All MIBs › IPADv2-MIB › ipadDS0ConfigHighUtilThreshold

ipadDS0ConfigHighUtilThreshold

Module: IPADv2-MIB

OID (symbolic): IPADv2-MIB::ipadDS0ConfigHighUtilThreshold

OID (numeric): 1.3.6.1.4.1.321.100.1.19.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

Number of seconds a high utilization condition must be present within 15 minutes before an alarm condition is declared.

What is ipadDS0ConfigHighUtilThreshold?

This object specifies the number of seconds that a DS0 (digital signal level 0, 64 kbps) channel must remain at high utilization within a 15-minute window before triggering a high-utilization alarm condition. It prevents false alarms from brief traffic spikes by requiring sustained high utilization. An operator would configure this threshold based on service level agreements and expected traffic patterns to balance sensitivity with stability.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.19.1.1.5
snmpwalk -v2c -c public <target> IPADv2-MIB::ipadDS0ConfigHighUtilThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.19.1.1.5.1
snmpget -v2c -c public <target> IPADv2-MIB::ipadDS0ConfigHighUtilThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.19.1.1.5.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.321verilinkDS8200v2-TC-MIB
1.3.6.1.4.1.321.100hbuDS8200v2-TC-MIB
1.3.6.1.4.1.321.100.1ipadIPAD-MIB
1.3.6.1.4.1.321.100.1.19ipadDS0ConfigIPADv2-MIB
1.3.6.1.4.1.321.100.1.19.1ipadDS0ConfigTableIPADv2-MIB
1.3.6.1.4.1.321.100.1.19.1.1ipadDS0ConfigTableEntryIPADv2-MIB
1.3.6.1.4.1.321.100.1.19.1.1.5ipadDS0ConfigHighUtilThresholdIPADv2-MIB

Module

This MIB depends on