All MIBs › IPAD-NAT-MIB › ipadNatUDPTimer
ipadNatUDPTimer
Module: IPAD-NAT-MIB
OID (symbolic): IPAD-NAT-MIB::ipadNatUDPTimer
OID (numeric): 1.3.6.1.4.1.321.100.1.26.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is ipadNatUDPTimer?
A read-write integer setting the idle timeout for a UDP NAT translation entry, since UDP has no explicit connection teardown to signal when a flow is done. Admins tune this to control how quickly translations for UDP-based apps like DNS or VoIP are released after traffic stops.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.26.1.12 snmpwalk -v2c -c public <target> IPAD-NAT-MIB::ipadNatUDPTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.26.1.12.1 snmpget -v2c -c public <target> IPAD-NAT-MIB::ipadNatUDPTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.26.1.12.1 i <value>
Start monitoring Verilink IPAD router/access device (NAT) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPAD-NAT-MIB::ipadNatUDPTimer OID value, configure state conditions and alerts, and monitor any Verilink IPAD router/access device (NAT) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.321 | verilink | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100 | hbu | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100.1 | ipad | IPAD-IPSTART-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.321.100.1.26 | ipadNat | IPAD-NAT-MIB |
| 1.3.6.1.4.1.321.100.1.26.1 | ipadNatParms | IPAD-NAT-MIB |
| 1.3.6.1.4.1.321.100.1.26.1.12 | ipadNatUDPTimer | IPAD-NAT-MIB |