All MIBs › IPAD-NAT-MIB › ipadNatIPEntryTimer
ipadNatIPEntryTimer
Module: IPAD-NAT-MIB
OID (symbolic): IPAD-NAT-MIB::ipadNatIPEntryTimer
OID (numeric): 1.3.6.1.4.1.321.100.1.26.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is ipadNatIPEntryTimer?
A read-write integer setting the idle timeout for a generic NAT translation table entry before it's aged out. Admins tune this to control how long an inactive translation stays reserved, balancing table capacity against reconnection speed for intermittent traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.26.1.7 snmpwalk -v2c -c public <target> IPAD-NAT-MIB::ipadNatIPEntryTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.26.1.7.1 snmpget -v2c -c public <target> IPAD-NAT-MIB::ipadNatIPEntryTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.26.1.7.1 i <value>
Start monitoring Verilink IPAD router/access device (NAT) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPAD-NAT-MIB::ipadNatIPEntryTimer OID value, configure state conditions and alerts, and monitor any Verilink IPAD router/access device (NAT) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.321 | verilink | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100 | hbu | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100.1 | ipad | IPAD-IPSTART-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.321.100.1.26 | ipadNat | IPAD-NAT-MIB |
| 1.3.6.1.4.1.321.100.1.26.1 | ipadNatParms | IPAD-NAT-MIB |
| 1.3.6.1.4.1.321.100.1.26.1.7 | ipadNatIPEntryTimer | IPAD-NAT-MIB |