All MIBs › IPAD-NAT-MIB › ipadNatEnable
ipadNatEnable
Module: IPAD-NAT-MIB
OID (symbolic): IPAD-NAT-MIB::ipadNatEnable
OID (numeric): 1.3.6.1.4.1.321.100.1.26.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is ipadNatEnable?
A read-write switch turning Network Address Translation on or off for this Verilink IPAD router, with values other(1), disable(2), or enable(3). Admins set this to enable(3) to start translating addresses between the local and global sides of the router, or disable(2) to pass traffic through untranslated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.26.1.1 snmpwalk -v2c -c public <target> IPAD-NAT-MIB::ipadNatEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.26.1.1.1 snmpget -v2c -c public <target> IPAD-NAT-MIB::ipadNatEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.26.1.1.1 i <value>
Start monitoring Verilink IPAD router/access device (NAT) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPAD-NAT-MIB::ipadNatEnable OID value, configure state conditions and alerts, and monitor any Verilink IPAD router/access device (NAT) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.321 | verilink | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100 | hbu | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100.1 | ipad | IPAD-IPSTART-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.321.100.1.26 | ipadNat | IPAD-NAT-MIB |
| 1.3.6.1.4.1.321.100.1.26.1 | ipadNatParms | IPAD-NAT-MIB |
| 1.3.6.1.4.1.321.100.1.26.1.1 | ipadNatEnable | IPAD-NAT-MIB |