All MIBs › IPAD-ATM-MIB › ipadAtmVccSegLoopbackCommand
ipadAtmVccSegLoopbackCommand
Module: IPAD-ATM-MIB
OID (symbolic): IPAD-ATM-MIB::ipadAtmVccSegLoopbackCommand
OID (numeric): 1.3.6.1.4.1.321.100.1.25.3.1.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A command to issue on the VCC Loopback. The start command is used to start an OAM F5 VCC loopback. The stop command is used to terminate the OAM loopback. The statistics variables associated with the OAM loopback are automatically cleared when a loopback is started.
What is ipadAtmVccSegLoopbackCommand?
Starts or stops a segment-level OAM F5 loopback test on this VCC (testing only the local segment rather than the full end-to-end path): start(2) begins it and clears its stats, stop(3) ends it. An admin runs this to isolate whether a fault lies within the local network segment versus further downstream, complementing the end-to-end loopback test.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.25.3.1.1.25 snmpwalk -v2c -c public <target> IPAD-ATM-MIB::ipadAtmVccSegLoopbackCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.25.3.1.1.25.1 snmpget -v2c -c public <target> IPAD-ATM-MIB::ipadAtmVccSegLoopbackCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.25.3.1.1.25.1 i <value>
Start monitoring Verilink IPAD ATM access multiplexer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPAD-ATM-MIB::ipadAtmVccSegLoopbackCommand OID value, configure state conditions and alerts, and monitor any Verilink IPAD ATM access multiplexer from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.321 | verilink | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100 | hbu | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100.1 | ipad | IPAD-IPSTART-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.321.100.1.25 | ipadAtm | IPAD-ATM-MIB |
| 1.3.6.1.4.1.321.100.1.25.3 | ipadAtmVccParms | IPAD-ATM-MIB |
| 1.3.6.1.4.1.321.100.1.25.3.1 | ipadAtmVccTable | IPAD-ATM-MIB |
| 1.3.6.1.4.1.321.100.1.25.3.1.1 | ipadAtmVccTableEntry | IPAD-ATM-MIB |
| 1.3.6.1.4.1.321.100.1.25.3.1.1.25 | ipadAtmVccSegLoopbackCommand | IPAD-ATM-MIB |