IPAD-ATM-MIB :: ipadAtmVccEtoeContCheckStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › IPAD-ATM-MIB › ipadAtmVccEtoeContCheckStatus

ipadAtmVccEtoeContCheckStatus

Module: IPAD-ATM-MIB

OID (symbolic): IPAD-ATM-MIB::ipadAtmVccEtoeContCheckStatus

OID (numeric): 1.3.6.1.4.1.321.100.1.25.3.1.1.36

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The current state of Continuity Check for this VCC. In the ready state, no CC is being performed. The ready state indicates CC is permitted to be activated. The activating state indicates CC has been requested and is being activated. During activation, an OAM activation cell is sent to the opposite endpoint to request CC. Once an activation confirmed cell is received, the state is then changed to active. Reception of an activation denied response or a multiple of 3 ten-second time outs waiting for a confirmation will result in an activationFailed state. CC sourcing is performed when state is active or activating. CC sinking is performed when state is active.

What is ipadAtmVccEtoeContCheckStatus?

The current continuity-check state machine status for this VCC: ready(1) idle and available, activating(4) an activation cell was just sent awaiting confirmation, active(2) confirmed and running, activationFailed(3) either denied or timed out after repeated attempts, or deactivating(5). An admin seeing activationFailed(3) knows the far end either rejected the CC request or never responded, pointing to a signaling or compatibility problem on the circuit.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.25.3.1.1.36
snmpwalk -v2c -c public <target> IPAD-ATM-MIB::ipadAtmVccEtoeContCheckStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.25.3.1.1.36.1
snmpget -v2c -c public <target> IPAD-ATM-MIB::ipadAtmVccEtoeContCheckStatus.1

Start monitoring Verilink IPAD ATM access multiplexer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPAD-ATM-MIB::ipadAtmVccEtoeContCheckStatus OID value, configure state conditions and alerts, and monitor any Verilink IPAD ATM access multiplexer from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.321verilinkDS8200v2-TC-MIB
1.3.6.1.4.1.321.100hbuDS8200v2-TC-MIB
1.3.6.1.4.1.321.100.1ipadIPAD-IPSTART-MIB
Numeric OIDNameModule
1.3.6.1.4.1.321.100.1.25ipadAtmIPAD-ATM-MIB
1.3.6.1.4.1.321.100.1.25.3ipadAtmVccParmsIPAD-ATM-MIB
1.3.6.1.4.1.321.100.1.25.3.1ipadAtmVccTableIPAD-ATM-MIB
1.3.6.1.4.1.321.100.1.25.3.1.1ipadAtmVccTableEntryIPAD-ATM-MIB
1.3.6.1.4.1.321.100.1.25.3.1.1.36ipadAtmVccEtoeContCheckStatusIPAD-ATM-MIB