All MIBs › INXNTS-MIB › riTsPortParity
riTsPortParity
Module: INXNTS-MIB
OID (symbolic): INXNTS-MIB::riTsPortParity
OID (numeric): 1.3.6.1.4.1.28.4.28.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The parity of the port. Enter a value for parity that matches the parity setting of the device attached to the INX-NTS port. The default is none(1). The parity bit is stripped before the data is sent across the network.
What is riTsPortParity?
The parity setting for this serial port; must match the attached device's setting, defaults to none(1), and the parity bit is stripped before the data crosses the network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28.4.28.1.9 snmpwalk -v2c -c public <target> INXNTS-MIB::riTsPortParity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.28.4.28.1.9.1 snmpget -v2c -c public <target> INXNTS-MIB::riTsPortParity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.28.4.28.1.9.1 i <value>
Start monitoring Interlan (Micom-Interlan) NTS Ethernet transport card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNTS-MIB::riTsPortParity OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NTS Ethernet transport card from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.28 | interlan | INXNMM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.28.4 | riTs | INXNTS-MIB |
| 1.3.6.1.4.1.28.4.28 | riTsPortTable | INXNTS-MIB |
| 1.3.6.1.4.1.28.4.28.1 | riTsPortEntry | INXNTS-MIB |
| 1.3.6.1.4.1.28.4.28.1.9 | riTsPortParity | INXNTS-MIB |