INXNTS-MIB :: riTsPortModemControl

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INXNTS-MIB › riTsPortModemControl

riTsPortModemControl

Module: INXNTS-MIB

OID (symbolic): INXNTS-MIB::riTsPortModemControl

OID (numeric): 1.3.6.1.4.1.28.4.28.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The type of modem control, if any, on this port. This setting determines the use of the modem control RS-232 signals. Enter a value that matches the setting of the attached device.

o none(1) means that no modem control signals are in use. This is the default. o dce(2) means that the INX-NTS port will act as a DCE device in monitoring the modem control signals. This is the appropriate setting if you are attaching a DTE device (for example, a terminal) that uses these signals to the INX-NTS port. (Ports are always wired as DCE, regardless of modem settings.) o dte(3) means that the INX-NTS port will act as a DTE (Data Terminal Equipment) device in monitoring the modem control signals. Use this setting when attaching a DCE (Data Communication Equipment) device (such as a modem) to the INX-NTS port.

Note: Setting Modem Control to DTE can require the use of a cabling adapter at the device.

What is riTsPortModemControl?

Selects how this port monitors RS-232 modem-control signals: dce(2) if a terminal (DTE) is attached, dte(3) if a modem (DCE) is attached, or none(1) if modem signaling isn't used.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28.4.28.1.14
snmpwalk -v2c -c public <target> INXNTS-MIB::riTsPortModemControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.28.4.28.1.14.1
snmpget -v2c -c public <target> INXNTS-MIB::riTsPortModemControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.28.4.28.1.14.1 i <value>

Start monitoring Interlan (Micom-Interlan) NTS Ethernet transport card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNTS-MIB::riTsPortModemControl OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NTS Ethernet transport card from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.28interlanINXNMM-MIB
Numeric OIDNameModule
1.3.6.1.4.1.28.4riTsINXNTS-MIB
1.3.6.1.4.1.28.4.28riTsPortTableINXNTS-MIB
1.3.6.1.4.1.28.4.28.1riTsPortEntryINXNTS-MIB
1.3.6.1.4.1.28.4.28.1.14riTsPortModemControlINXNTS-MIB