INXNTS-MIB :: riTsPortFlowControlOut

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INXNTS-MIB › riTsPortFlowControlOut

riTsPortFlowControlOut

Module: INXNTS-MIB

OID (symbolic): INXNTS-MIB::riTsPortFlowControlOut

OID (numeric): 1.3.6.1.4.1.28.4.28.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The type of flow control used on the port for data being sent. o None(1) indicates that no flow control is in use. o Xonxoff(2) indicates that software flow control is in use. For a terminal attached to an INX-NTS port, this setting allows you to press the XOFF control character (Ctrl-S by default) in order to halt output from the INX-NTS port to the screen, and the XON control character (Ctrl-Q by default) to resume output to the screen. o Hardware(3) indicates that hardware flow control is in use. (This setting not valid for use with an NTS-TELCO.) o Handx(4) indicates that both hardware and software flow control are in use. (This setting not valid for use with an NTS-TELCO.)

What is riTsPortFlowControlOut?

The flow-control method used for data this port sends out; xonxoff(2) lets the attached terminal pause/resume screen output with Ctrl-S/Ctrl-Q, while hardware(3)/handx(4) aren't valid on an NTS-TELCO.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28.4.28.1.16
snmpwalk -v2c -c public <target> INXNTS-MIB::riTsPortFlowControlOut

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.28.4.28.1.16.1
snmpget -v2c -c public <target> INXNTS-MIB::riTsPortFlowControlOut.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.28.4.28.1.16.1 i <value>

Start monitoring Interlan (Micom-Interlan) NTS Ethernet transport card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNTS-MIB::riTsPortFlowControlOut OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NTS Ethernet transport card from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.28interlanINXNMM-MIB
Numeric OIDNameModule
1.3.6.1.4.1.28.4riTsINXNTS-MIB
1.3.6.1.4.1.28.4.28riTsPortTableINXNTS-MIB
1.3.6.1.4.1.28.4.28.1riTsPortEntryINXNTS-MIB
1.3.6.1.4.1.28.4.28.1.16riTsPortFlowControlOutINXNTS-MIB