INXNTS-MIB :: riTsPortBaudOut

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INXNTS-MIB › riTsPortBaudOut

riTsPortBaudOut

Module: INXNTS-MIB

OID (symbolic): INXNTS-MIB::riTsPortBaudOut

OID (numeric): 1.3.6.1.4.1.28.4.28.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The baud rate for data transmitted by the port, in bits per second (bps).

If you want the INX-NTS to automatically determine baud rates, you can configure it to do so by setting this variable to 0. If this variable returns 0, automatic baud rate determination is already in effect. If this variable returns a value other than 0, that value is the current baud rate. The default baud rate is 9600.

Note: The INX-NTS uses only a single baud rate parameter, which is used in both directions. Therefore, you cannot set this variable and the previous one, Baud Rate for Received Data, to different values; the INX-NTS will use whichever value was last received by the management agent as the baud rate.

What is riTsPortBaudOut?

The baud rate used for data transmitted on this serial port; like the received-data baud variable, setting it to 0 enables auto-baud detection, and because the port uses a single physical baud rate, this always tracks whichever of the two was set most recently.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28.4.28.1.8
snmpwalk -v2c -c public <target> INXNTS-MIB::riTsPortBaudOut

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.28.4.28.1.8.1
snmpget -v2c -c public <target> INXNTS-MIB::riTsPortBaudOut.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.28.4.28.1.8.1 i <value>

Start monitoring Interlan (Micom-Interlan) NTS Ethernet transport card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNTS-MIB::riTsPortBaudOut OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NTS Ethernet transport card from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.28interlanINXNMM-MIB
Numeric OIDNameModule
1.3.6.1.4.1.28.4riTsINXNTS-MIB
1.3.6.1.4.1.28.4.28riTsPortTableINXNTS-MIB
1.3.6.1.4.1.28.4.28.1riTsPortEntryINXNTS-MIB
1.3.6.1.4.1.28.4.28.1.8riTsPortBaudOutINXNTS-MIB