All MIBs › INXNTS-MIB › dot3MACSubLayerStatus
dot3MACSubLayerStatus
Module: INXNTS-MIB
OID (symbolic): INXNTS-MIB::dot3MACSubLayerStatus
OID (numeric): 1.3.6.1.3.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The operational status of the MAC sublayer, i.e., whether it is ready to transmit and receive frames. Because this sublayer is always active in the INX-NTS, this variable always returns enabled(1), and can only be set to enabled(1).
What is dot3MACSubLayerStatus?
Reports whether the MAC sublayer is ready to send/receive frames; on the INX-NTS this sublayer is permanently active, so this always reads enabled(1) and can only be set to enabled(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.3.1.1.3 snmpwalk -v2c -c public <target> INXNTS-MIB::dot3MACSubLayerStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.3.1.1.3.1 snmpget -v2c -c public <target> INXNTS-MIB::dot3MACSubLayerStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.3.1.1.3.1 i <value>
Start monitoring Interlan (Micom-Interlan) NTS Ethernet transport card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNTS-MIB::dot3MACSubLayerStatus OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NTS Ethernet transport card from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.3 | dot3 | INXNMM-MIB |
| 1.3.6.1.3.3.1 | dot3Table | INXNMM-MIB |
| 1.3.6.1.3.3.1.1 | dot3Entry | INXNMM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.3.1.1.3 | dot3MACSubLayerStatus | INXNTS-MIB |