All MIBs › INXNMM-MIB › riPortFramesTooLongRate
riPortFramesTooLongRate
Module: INXNMM-MIB
OID (symbolic): INXNMM-MIB::riPortFramesTooLongRate
OID (numeric): 1.3.6.1.4.1.28.13.1.1.23
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: The rate of frames/sec sent by the device attached to this port that were greater than 1520 octets long, but not greater than 5 msec in duration (which would indicate a jabber condition).
What is riPortFramesTooLongRate?
Gives the current rate of oversized (non-jabbering) frames from the device on this port, flagging a device that has begun sending frames too large for this segment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28.13.1.1.23 snmpwalk -v2c -c public <target> INXNMM-MIB::riPortFramesTooLongRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.28.13.1.1.23.1 snmpget -v2c -c public <target> INXNMM-MIB::riPortFramesTooLongRate.1
Start monitoring Interlan (Micom-Interlan) NMM Ethernet management card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNMM-MIB::riPortFramesTooLongRate OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NMM Ethernet management card from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.28 | interlan | INXNMM-MIB |
| 1.3.6.1.4.1.28.13 | riPort | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1 | riPortTable | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1.1 | riPortEntry | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1.1.23 | riPortFramesTooLongRate | INXNMM-MIB |