All MIBs › INXNMM-MIB › riPortCRCErrorsRate
riPortCRCErrorsRate
Module: INXNMM-MIB
OID (symbolic): INXNMM-MIB::riPortCRCErrorsRate
OID (numeric): 1.3.6.1.4.1.28.13.1.1.15
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: The rate of frames/sec sent by the device attached to this port that are an integral number of octets in length and do not pass the FCS check.
What is riPortCRCErrorsRate?
Gives the current rate of CRC-errored frames from the device on this port, useful for correlating a spike in errors with a specific time or event on that cable run.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28.13.1.1.15 snmpwalk -v2c -c public <target> INXNMM-MIB::riPortCRCErrorsRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.28.13.1.1.15.1 snmpget -v2c -c public <target> INXNMM-MIB::riPortCRCErrorsRate.1
Start monitoring Interlan (Micom-Interlan) NMM Ethernet management card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNMM-MIB::riPortCRCErrorsRate OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NMM Ethernet management card from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.28 | interlan | INXNMM-MIB |
| 1.3.6.1.4.1.28.13 | riPort | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1 | riPortTable | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1.1 | riPortEntry | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1.1.15 | riPortCRCErrorsRate | INXNMM-MIB |