All MIBs › INXNMM-MIB › riPortCRCErrors
riPortCRCErrors
Module: INXNMM-MIB
OID (symbolic): INXNMM-MIB::riPortCRCErrors
OID (numeric): 1.3.6.1.4.1.28.13.1.1.14
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: The number of frames sent by the device attached to this port that are an integral number of octets in length (i.e., the number of bits they contain is a multiple of eight) and do not pass the FCS check.
What is riPortCRCErrors?
Counts properly-framed frames sent by the device on this port that fail the FCS/CRC check, pointing to a bad cable run or faulty NIC on that specific port rather than a chassis-wide issue.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28.13.1.1.14 snmpwalk -v2c -c public <target> INXNMM-MIB::riPortCRCErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.28.13.1.1.14.1 snmpget -v2c -c public <target> INXNMM-MIB::riPortCRCErrors.1
Start monitoring Interlan (Micom-Interlan) NMM Ethernet management card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNMM-MIB::riPortCRCErrors OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NMM Ethernet management card from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.28 | interlan | INXNMM-MIB |
| 1.3.6.1.4.1.28.13 | riPort | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1 | riPortTable | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1.1 | riPortEntry | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1.1.14 | riPortCRCErrors | INXNMM-MIB |