All MIBs › INXNMM-MIB › riPortAlignmentErrorsRate
riPortAlignmentErrorsRate
Module: INXNMM-MIB
OID (symbolic): INXNMM-MIB::riPortAlignmentErrorsRate
OID (numeric): 1.3.6.1.4.1.28.13.1.1.25
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: The rate of frames/sec sent by the device attached to this port that were not an integral number of octets in length. (These frames will not pass the FCS check but are not counted as FCS errors.) of the INX-NMM, this variable always returns 0.
What is riPortAlignmentErrorsRate?
Gives the current rate of misaligned frames from the device on this port, helping an admin see if an alignment fault on that specific cable run is worsening.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28.13.1.1.25 snmpwalk -v2c -c public <target> INXNMM-MIB::riPortAlignmentErrorsRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.28.13.1.1.25.1 snmpget -v2c -c public <target> INXNMM-MIB::riPortAlignmentErrorsRate.1
Start monitoring Interlan (Micom-Interlan) NMM Ethernet management card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNMM-MIB::riPortAlignmentErrorsRate OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NMM Ethernet management card from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.28 | interlan | INXNMM-MIB |
| 1.3.6.1.4.1.28.13 | riPort | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1 | riPortTable | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1.1 | riPortEntry | INXNMM-MIB |
| 1.3.6.1.4.1.28.13.1.1.25 | riPortAlignmentErrorsRate | INXNMM-MIB |