Description: The INX media type for the connectivity module located in this slot. o backbone thick(11) indicates that the media type of the INX-AUI or INX-FST is set for connection to an external transceiver. o backbone-thin(12) indicates that the media type of the INX-AUI is set for connection to Thin Ethernet. o backbone-fiber(13) indicates that the media type of the INX-FST is set for connection to fiber-optic cable. o NTS-TELCO(17) and NTS-RJ45(18) are the connectivity modules for the INX-NTS logic module. The NTS-RJ45 has 16 RJ-45 ports, numbered 1 through 16, top to bottom. The NTS-TELCO has two 50-pin telco connectors. o 10BT-TELCO(33) and 10BT-RJ45(34) are the connectivity modules for the INX-10BT logic module. The 10BT-RJ45 has 12 RJ-45 twisted pair transceiver ports. The 10BT-TELCO has one 50-pin telco connector. o FOIRL-FST(49) is the connectivity module for the INX-FOIRL, containing 6 pairs of ST fiber-optic connectors for connection to six ports. o BRIDGE-V35(81) and BRIDGE-X21U(82) are the connectivity modules for the INX-RBR. o other(200) indicates that the connectivity module is not an INX-AUI or INX-FST; you cannot set this value.