All MIBs › INXNMM-MIB › riLdcHfExtState
riLdcHfExtState
Module: INXNMM-MIB
OID (symbolic): INXNMM-MIB::riLdcHfExtState
OID (numeric): 1.3.6.1.4.1.28.10.14.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The current state of external hot failover detection. External hot failover detection is only available for the bus on which the master INX-NMM's NIC is configured. Setting this variable to enabled(1) invokes external hot failover detection/monitoring. In addition to the status returned by the riLdcHfIntState object, the following two failures descriptions are returned if an enable(1) fails with a General Error. dis-zero-p1-addr(8) is returned when the Ping 1 address is set to 0.0.0.0. See the Ext Failover Detection/Ping 1 variable. dis-wrong-ext-bus(9) is returned when the master NIC is on Bus B and the primary or backup configuration for Bus B is invalid. See the Bus B Primary Backbone Slot #, Bus B Backup Backbone Slot #, Bus B Primary Backbone Media, and Bus B Backup Backbone Media variables.
What is riLdcHfExtState?
Enables or disables external hot-failover detection, which pings a configured host to verify connectivity beyond the chassis itself and is only available on the bus the master INX-NMM's own NIC uses; a failed enable returns a specific dis-* value (such as dis-zero-p1-addr) diagnosing what to fix.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28.10.14.12 snmpwalk -v2c -c public <target> INXNMM-MIB::riLdcHfExtState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.28.10.14.12.1 snmpget -v2c -c public <target> INXNMM-MIB::riLdcHfExtState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.28.10.14.12.1 i <value>
Start monitoring Interlan (Micom-Interlan) NMM Ethernet management card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNMM-MIB::riLdcHfExtState OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NMM Ethernet management card from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.28 | interlan | INXNMM-MIB |
| 1.3.6.1.4.1.28.10 | riLdcNmm | INXNMM-MIB |
| 1.3.6.1.4.1.28.10.14 | riHotFail | INXNMM-MIB |
| 1.3.6.1.4.1.28.10.14.12 | riLdcHfExtState | INXNMM-MIB |