All MIBs › INXNMM-MIB › riLdcHfExtPing2
riLdcHfExtPing2
Module: INXNMM-MIB
OID (symbolic): INXNMM-MIB::riLdcHfExtPing2
OID (numeric): 1.3.6.1.4.1.28.10.14.14
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The IP address of a second node to ping should the first host not respond (see the previous variable, Ext Failover Detection/Ping 1). This eliminates the false hot failover detections that occur when the ping1 host is rebooting at the time the ping is made. The INX-NMM only tries to ping this address once the ping address reverts to the one specified by Ext Failover Detection/Ping 1. As with Ext Failover Detection/Ping1, set this variable to the address of the node to which the master INX-NMM will ping to detect external cable failures. The master INX-NMM sends the pings on the bus for which its NIC is configured (i.e., the value of Logic Module Bus). If you set this variable to 0.0.0.0, external hot failover detection is enabled, but only Ext Failover Detection/Ping1 is used.
What is riLdcHfExtPing2?
Gives a secondary ping target used only after the primary (riLdcHfExtPing1) address stops responding, avoiding false failover triggers caused by the primary host simply rebooting; setting it to 0.0.0.0 means external detection still relies solely on the primary target.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.28.10.14.14 snmpwalk -v2c -c public <target> INXNMM-MIB::riLdcHfExtPing2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.28.10.14.14.1 snmpget -v2c -c public <target> INXNMM-MIB::riLdcHfExtPing2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.28.10.14.14.1 a <value>
Start monitoring Interlan (Micom-Interlan) NMM Ethernet management card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNMM-MIB::riLdcHfExtPing2 OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NMM Ethernet management card from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.28 | interlan | INXNMM-MIB |
| 1.3.6.1.4.1.28.10 | riLdcNmm | INXNMM-MIB |
| 1.3.6.1.4.1.28.10.14 | riHotFail | INXNMM-MIB |
| 1.3.6.1.4.1.28.10.14.14 | riLdcHfExtPing2 | INXNMM-MIB |